Post Offer Free
3C-LINK TECHNOLOGY CO.,LTD  

Gold Index: 6452

You are here: home  > 100BASE-FX Spring Latch Fiber Optic Transceiver Module Single Power Supply For Router / Server Inter

100BASE-FX Spring Latch Fiber Optic Transceiver Module Single Power Supply For Router / Server Inter 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: 3CPSG-113L1SN-LX

Fiber Optic Transceiver / 100BASE-FX Spring-Latch SFP T

Fiber Optic Transceiver / 100BASE-FX Spring-Latch SFP Transceiver,10km Reach / SGMII SFP100FX 10 KM fiber optical module

 

 

 

Features

  1. Build-in PHY supporting SGMII Interface
  2. Build-in high performance MCU supporting easier configuration
  3. 100BASE-FX operation
  4. 1310nm FP laser and PIN photo-detector
  5. 2km transmission with SMF
  6. Standard serial ID information Compatible with SFP MSA
  7. SFP MSA package with duplex LC connector
  8. With Spring-Latch for high density application
  9. Very low EMI and excellent ESD protection
  10. +3.3V single power supply
  11. Operating case temperature: 0 to +70°C

 

 

Applications

 

       * witch to Switch interface

* Switched backplane applications

* Router/Server interface

* Gigabit Ethernet To Fast Ethernet

* Other optical transmission systems

 

 

 

Specifications

 

OEM and ODM

OEM/ODM order is available

we can supply products according to your requirements, and design products label for your company.

we have helped many clients to complete important project, and established long-term business relations, i also hope we can cooperate with you.

 

Warranty

SFP/GBIC/CWDM/DWDM/XFP/SFP+/XENPAK/X2/BIDI SFP&GBIC comes with 2-year warranty from the date of shipment.

 

Standard

Compatible with SFP MSA

Compatible with IEEE 802.3ah-2004

 

 

 

Description

 

The SFP transceiver is high performance, cost effective modules. It is designed for 100BASE-FX applications of 2km with SMF. The transceiver consists of two sections: The standard SFP part and the PHY part built with SGMII interface.

 

The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS(or Link)/Disable/Fault information via I2C register access. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA).

 

Absolute Maximum Ratings

Stress in excess of the maximum absolute ratings can cause permanent damage to the module

Parameter Symbol Min Max Unit
Maximum Supply Voltage Vcc -0.5 3.6 V
Storage Temperature TS -40 100
Relative Humidity RH 0 85 %

 

Recommended Operating Conditions

Parameter Symbol Min Typical Max Unit
Operating Case Temperature TC 0   70
Power Supply Voltage VCC 3.1 3.3 3.5 V
Power Supply Current Icc     400 mA
Data Rate     125   Mbps

 

Optical and Electrical Characteristics

Parameter Symbol Min. Typical Max. Unit Notes
Transmitter
Centre Wavelength λC 1261 1310 1360 nm  
Average Output Power P0ut -13   -18 dBm 2
Spectral Width (RMS) σ     7.7 nm 2
Extinction Ratio EX 10   17
bigPhoto
 Mr. Mr. Waymon.Chuang

Tel: 86-755-27821691
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Related Products

Company Info

3C-LINK TECHNOLOGY CO.,LTD [China (Mainland)]


Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (130)